SP Common Issues
This is a list of solutions to common SP deployment issues
On-chain Proposal¶
1. Why send tx failed?¶
- Reason 1: The gnfd binary doesn’t match, you should use the latest version
- Reason 2: The chain ID doesn’t match, you should specify the chain ID correctly. For Greenfield
mainnetyou should add--chain-id "greenfield_1017-1"; for Greenfieldtestnet, you should add--chain-id "greenfield_5600-1".
2. Why is Proposal Rejected?¶
If your proposal received less than ⅔ of yes votes from validators, your propoosal will be rejected.
3. Why is Proposal Failed¶
To query the failed reason, run the following command:
# Greenfield Mainnet
./gnfd query gov proposal <proposal-id> --node https://greenfield-chain-us.bnbchain.org:443
# Greenfield Testnet
./gnfd q gov proposal <proposal-id> --node https://gnfd-testnet-fullnode-tendermint-ap.bnbchain.org:443
If you see the following message:
failed_reason: 'spendable balance 999009992000000000000BNB is smaller than 1000000000000000000000BNB:
It means the proposal initiator should be the funding address, and it should have balance of 1k BNB as deposit, according to above error msg.
Please note the initial deposit requirement varies on different environments. see funding-address
SP Node Issues¶
1. Address Not Found Issue¶
Description¶
After starting SP binary, see the following error:
rpc error: code = NotFound desc = rpc error: code = NotFound desc = account 0x12334567890 not found: key not found"
Root Cause¶
It’s not possiible to find information about a newly created address on chain.
Solution¶
Before starting your SP, transfer BNB to all of your 5 addresses.
2. Database Configuration Issue¶
Description¶
After starting SP binary, see the following error:
Table "block_syncer.master_db" does not exist
Failed to get db config from config file
Root Cause¶
Data source name(dsn) is not set in config.toml.
Solution¶
[BlockSyncer]
Modules = ['epoch','bucket','object','payment','group','permission','storage_provider','prefix_tree', 'virtual_group','sp_exit_events','object_id_map','general']
Dsn = [BsDB_User]:[BsDB_Passwd]@tcp([BsDB_Address])/[BsDB_Database?parseTime=true&multiStatements=true&loc=Local&interpolateParams=true
3. Object Sealed State Issue¶
Description¶
After uploading a file, you see an error message:
Message: object has not been sealed state
From SP log, you see the following:
{"t":"2023-07-10T11:34:50.856+0800","l":"error","caller":"gfspapp/sign_server.go:42","msg":"failed to seal object","error":"code_space:\"signer\" http_status_code:400 inner_code:120002 description:\"failed to broadcast seal object tx, error: failed to broadcast tx, resp code: 13\" "}
Root Cause¶
SealAddress does not have enough BNB to sign seal transactions
Solution¶
Transfer BNB to SealAddress.
4. P2P Issue¶
Description¶
After starging SP binary, you see an error message:
failed to parse address 'k8s-gftestne-p2pexter-bc25ac70bc-a31e9596d87054c3.elb.us-east-1.amazonaws.com:9933' domain
Root Cause¶
SP is trying to get connected with invalid SP URL in P2P network
Solution¶
Update [P2P] setting in config.toml:
[P2P]
# p2p node msg Secp256k1 encryption key, it is different from other SP's addresses
P2PPrivateKey = '${p2p_private_key}'
P2PAddress = '0.0.0.0:9933'
P2PAntAddress = '${load_balance_doamin:port}'
P2PBootstrap = []
P2PPingPeriod = 0
P2PAntAddress is your load balance address. If you don’t have a load balance address, you should have a public IP and use it in P2PAddress.
P2PBootstrap is not used anymore, you can leave this field empty.
5.MinIO Authentication Issue¶
Description¶
Cannot config Minio as storage
{"t":"2023-07-17T18:05:40.245+0800","l":"debug","caller":"storage/object_storage.go:15","msg":"created minio storage at endpoint http://172.17.0.2:9000/hashquark"}
Jul 17 18:05:41 10-7-46-85 gnfd-sp[18585]: {"t":"2023-07-17T18:05:40.245+0800","l":"info","caller":"storage/minio.go:37","msg":"new minio store succeeds","bucket":"hashquark"}
Jul 17 18:07:01 10-7-46-85 gnfd-sp[18585]: {"t":"2023-07-17T18:07:00.893+0800","l":"error","caller":"storage/s3.go:147","msg":"S3 failed to head bucket","error":"NoCredentialProviders: no valid providers in chain. Deprecated.\n\tFor verbose messaging see aws.Config.CredentialsChainVerboseErrors"}
Jul 17 18:07:01 10-7-46-85 gnfd-sp[18585]: {"t":"2023-07-17T18:07:00.893+0800","l":"error","caller":"piece/piece_store.go:88","msg":"failed to head bucket","error":"NoCredentialProviders: no valid providers in chain. Deprecated.\n\tFor verbose messaging see aws.Config.CredentialsChainVerboseErrors"}
Jul 17 18:07:01 10-7-46-85 gnfd-sp[18585]: {"t":"2023-07-17T18:07:00.893+0800","l":"error","caller":"piece/piece_store.go:77","msg":"failed to check bucket due to storage is not configured rightly ","error":"deny access bucket","object":"minio://hashquark/"}
Jul 17 18:07:01 10-7-46-85 gnfd-sp[18585]: {"t":"2023-07-17T18:07:00.893+0800","l":"error","caller":"piece/piece_store.go:21","msg":"failed to create storage","error":"deny access bucket"}
Root Cause¶
This is a MinIO authentication
Solution¶
You can refer here.
6. SP Standard Test Issue¶
Description¶
2023/07/26 19:06:03.543395 [INFO] GID 41, Uploading file - object: 2q4l5v4v3z, bucket: sc1bw
default error msg : <html>
<head><title>413 Request Entity Too Large</title></head>
<body>
<center><h1>413 Request Entity Too Large</h1></center>
<hr><center>nginx/1.18.0 (Ubuntu)</center>
</body>
</html>
{"level":"error","time":"2023-07-26T13:06:03-06:00","message":"do API error, url: https://sc1bw.gnfd-testnet-sp.epotter-qa.io/2q4l5v4v3z, err: statusCode 413 : code : unknown error request-id (Message: <html>\r\n<head><title>413 Request Entity Too Large</title></head>\r\n<body>\r\n<center><h1>413 Request Entity Too Large</h1></center>\r\n<hr><center>nginx/1.18.0 (Ubuntu)</center>\r\n</body>\r\n</html>)"}
2023/07/26 19:06:03.543395 [INFO] GID 41, Uploading file - object: 2q4l5v4v3z, bucket: sc1bw
default error msg : <html>
<head><title>413 Request Entity Too Large</title></head>
<body>
<center><h1>413 Request Entity Too Large</h1></center>
<hr><center>nginx/1.18.0 (Ubuntu)</center>
</body>
</html>
{"level":"error","time":"2023-07-26T13:06:03-06:00","message":"do API error, url: https://sc1bw.gnfd-testnet-sp.epotter-qa.io/2q4l5v4v3z, err: statusCode 413 : code : unknown error request-id (Message: <html>\r\n<head><title>413 Request Entity Too Large</title></head>\r\n<body>\r\n<center><h1>413 Request Entity Too Large</h1></center>\r\n<hr><center>nginx/1.18.0 (Ubuntu)</center>\r\n</body>\r\n</html>)"}
Root Cause¶
Nginx does not support large file
Solution¶
Enlarge proxy-boody-size
DCellar Integration Issues¶
1. No ‘Access-Control-Allow-Origin’ header is present on the requested resource¶
Error:
Access to XMLHttpRequest at 'https://fbgtest.gnfd-testnet-sp.fbgx.ai/?read-quota&year-month=2023-07' from origin 'https://dcellar.io' has been blocked by CORS policy: Response to preflight request doesn't pass access control check: No 'Access-Control-Allow-Origin' header is present on the requested resource.
Solution¶
Add these headers
Access-Control-Allow-Credentials:
true
Access-Control-Allow-Headers:
Access-Control-Allow-Headers: DNT,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type,Content-MD5,Range,Authorization,X-Gnfd-Content-Sha256,X-Gnfd-Unsigned-Msg,X-Gnfd-Txn-Hash,Date,X-Gnfd-Object-ID,X-Gnfd-Resource,X-Gnfd-Piece-Index,X-Gnfd-Redundancy-Index,Address,X-Gnfd-User-Address,X-Gnfd-App-Domain,X-Gnfd-App-Reg-Nonce,X-Gnfd-Date,X-Gnfd-App-Reg-Public-Key,X-Gnfd-App-Reg-Expiry-Date,X-Gnfd-Expiry-Timestamp
Access-Control-Allow-Methods:
GET, PUT, POST, DELETE, PATCH, OPTIONS
Access-Control-Allow-Origin:
*
Access-Control-Expose-Headers:
*, X-Gnfd-Request-ID,X-Gnfd-Signed-Msg,X-Gnfd-Object-ID,X-Gnfd-Integrity-Hash,X-Gnfd-Piece-Hash
Access-Control-Max-Age:
1728000
2. when an OPTION request is made, I get OPTIONS 405 (Method Not Allowed) error¶
Root cause¶
The 405 Method Not Allowed error occurs when the web server is configured in a way that does not allow you to perform a specific action for a particular URL. It’s an HTTP response status code that indicates that the request method is known by the server but is not supported by the target resource.The 405 Method Not Allowed error occurs when the web server is configured in a way that does not allow you to perform a specific action for a particular URL. It’s an HTTP response status code that indicates that the request method is known by the server but is not supported by the target resource.
Solution¶
Your application is likely running on a server using one of these three popular webserver software: Apache, nginx, or Cloudflare. Check your configuration files for your web server software for unintentional redirect or request handling instructions.